Skip to content
Sellout

Parameters

Details
686 LLU A5, 6x13x5, 608 SRS, 8x22x7, 688 LLB A5, 8x16x5, 699 LLB A5, 9x20x6, 61900 SRS, 10x22x6, 61000 SRS, 10x26x8, 61801 SRS, 12x21x5, 61901 SRS, 12x24x6, 61001 SRS, 12x28x8, 61802 SRS, 15x24x5, MR 15267 LLU, 15x26x7, 61902 SRS, 15x28x7, 61002 LLB, 15x32x9, 61803 SRS, 17x26x5, MR 17287 LLB A5, 17x28x7, 61903/29.5 LLB, 17x29,5x7, 61903 SRS, 17x30x7, MR 18307 LLB A5, 18x30x7, 61804 SRS, 20x32x7, MR 22378 LLB A5, 22x37x8, MR 2437 LLB A5, 24x37x7, MR 2437 LLU/LLB 24x37x7, 61805 SRS, 25x37x7, 61806 SRS, 30x42x7, 61808 VV, 40x52x7, R 6 SRS, 3/8x7/8x9/32", R 8 VV A5, 1/2x1 1/8x5/16",

Description

LLU/LLB Dual Seal Technology

Enduro ABEC 5 bearings use LLB type seals and our new LLU/LLB seals. The LLB seal is a light contact double lip groove seal. The LLU seals is a medium contact double lip groove seal and is Grey in color to easily identify. This Grey LLU seal should face out towards the elements for improved sealing and water protection. The Black color LLB seals are internal and help protect while spinning smoothly with low friction.

Grade 5 Chromium Steel Balls

High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.

52100 High Carbon Chromium Alloy Races

Enduro Bearings uses highest quality 52100 High Carbon Chromium Steel Alloy race material from Japan. There are many suppliers of 52100 material, but they do not all necessarily provide the same quality material. The material for Enduro steel races starts with and extremely-pure, vacuum de-gassed chromium steel alloy that is then hardened to Rockwell HRC 64 by multiple rounds of heat and cryogenic treatment. The material is then cut to size and the races are machined, ground and polished to a mirror finish for ABEC-% precision and noiseless movement.

Nylon/Graphite and Steel Ball Retainers

ABEC 5 bearings have either nylon/graphite retainers or new 1022 steel cages for improved strength. Depending on the usual duty for the specific bearing size, we now choose either 1022 steel or nylon/graphite to better suit the types of forces and duty the bearing most likely will handle. With the advent of thru-axles and asymmetric disc brake forces, 1022 steel retainers better align the balls with axial forces. Nylon/graphite retainers perform smoothest under strictly radial loads. 

Grease Type

ABEC 5 bearings are now using the recently improved formula of Mobil XHP 222 grease. The new formula performs better for all situations that we have ever tested. This includes protection against the elements of rain, dirt, muck, and sand over extended periods of testing, far outlasting previous greases we have tested. The new Mobil XHP 222 grease will not separate over time or with intense heat such as car storage on a hot day. It also can resist very low temperatures better than the competition such a snow or ice environments. 

The ABEC 5 Standard

To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

C-3 Clearance

This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.
All across the board, our bearings have higher standards of tolerance to ensure superior performance.

C-N Clearance

We also offer our new Dual Seal Abec-5 bearings with CN Internal clearences for manufacturers that use tighter tolerences within the given component. In a 10-18 I.D. bearing, our internal clearance standard is 3-12 micrometers.
All across the board, our bearings have higher standards of tolerance to ensure superior performance.

Ask a question

Reviews

Do you know this product? Write first review.

Delivery